Dri-Design® is a metal, dry joint, rain screen, pressure equalized wall panel system. True dry joints, no sealants, no gaskets.
System Depth - Is 1 ½"
Panel Joints - Are ½" - 5/8" Nominal
Material Type - is 304 and 316 stainless steel. Embossed stainless by rimex and rigidized are also available.
Material Thickness - varies and is dependant on the panel size. The most common thicknesses are 18 and 20 gauge.
Panel Corners - Welded or sealed
Weight - varies between 2 and 3 pounds per square foot.
Size Limitations - Panels that fit into these size parameters can be manufactured as Dri-Design®.
Finishes - 2b, #4 brushed and #7 polished. Call for other types available.
Best Size - For lowest cost. 36" x 36"
Details - Formed flashings
Outside Corner Options
- Custom welded
- Formed flashings
Substrate Requirements
- Substrate is required, 5/8" plywood preferred
- Weather barrier is required
Testing
- ASTM E 283 for Air- passed
- ASTM E 331 for Water- 15 psf
- ASTM E 330 for Structural- 65 psf
This information is subject to change without notice.
Download Specifications for Stainless Stell.
Design Guide: Stainless Steel