Painted Aluminum

Dri-Design is an advanced and very sophisticated metal wall panel system….made simple.

The myriad of features in Dri-Design that you would expect to be expensive are made affordable thanks to the unique patented interlocking design and automated manufacturing process.

Dri-Design can be detailed as simple as installing over DuPont Commercial Grade Tyvek and plywood or designed as a sophisticated pressure equalized rain-screen with outboard insulation…your choice.

• No sealants, gaskets or butyl tape in the panel joints means no dirty streaks or maintenance.
• Dri-Design panels are not laminated nor a composite – they will never delaminate.
• Sustainability – the fact is, composite or foam panels can’t match Dri-Design for its environmental footprint. Dri-Design is made with recycled content and is 100% recyclable.
• Fully tested to ASTM standards for air, water and structural performance.
• Tested to the latest AAMA 508-07 for pressure equalized rain screens that include passing a 15 pound water test.
• Hurricane tested and approved for Dade & Broward counties in Florida.
• Unlimited color palette.
• Unique interlocking panel design makes installation quick and easy.

System Depth:

1 ½” nominal

Material:

Aluminum

Material thickness:

.050, .062, .080, .125

Panel joints:

5/8” – 1”

Finish:

Kynar, unlimited color palette

Weight:

Less than 1 ½ pounds per square foot

Panel Sizes:

These are the recommended maximum size panels, if your project requirements exceed these dimensions, please contact a Dri-Design representative to discuss your specific requirements.

Installation Considerations

A substrate must be used behind the Dri-Design Wall Panel System. Some substrate options are 5/8” plywood, DensGlass Gold® or exterior grade gypsum board. Plywood will hold a fastener, however if DensGlass Gold® or exterior grade gypsum board is utilized, a flat strap or hat girt will be required.

Weather Barrier

A weather barrier is required for all Dri-Design installations. Your specific design and details will determine whether the barrier needs to be breathable or not. Please call us at 616-355-2970 or e-mail sales@dri-design.com with any questions regarding your specific project.

Fasteners

We recommend that stainless steel fasteners be used with neoprene or plastic washers.

Signs, Lighting and Handrails

Proper reinforcement must be installed behind the panels when attaching objects such as signs, lights and railings. DO NOT attach anything directly on the panels.