NO SEALANTS, GASKETS OR BUTYL TAPE IN THE PANEL JOINTS MEANS NO DIRTY STREAKS OR MAINTENANCE.
Dri-Design is an advanced and very sophisticated metal wall panel system….made simple.
The myriad of features in Dri-Design that you would expect to be expensive are made affordable thanks to the unique patented interlocking design and automated manufacturing process.
Please refer to the specific material for the correct size parameters of the material you intend to use.
- System Depth:
1 1/4” – 4” nominal, including Tapered and Shadow
Aluminum, VMZINC®, Copper and Stainless Steel
- Panel Joints:
1/2” nominal standard (1/8” – 1” available)
Available in all Dri-Design finishes
Varies based on material type
Most sizes and shapes. Density and location will vary depending on the image and specific needs of the project. Please speak with a Dri-Design representative about specific requests
A substrate must be used behind the Dri-Design Wall Panel System. Some substrate options are 5/8” plywood, DensGlass Gold® or exterior grade gypsum board. Plywood will hold a fastener, however, if DensGlass Gold® or exterior grade gypsum board is utilized, a flat strap or hat girt will be required.
A weather barrier is required for all Dri-Design installations. Your specific design and details will determine whether the barrier needs to be breathable or not. Please call us at 616-355-2970 or e-mail Sales@Dri-Design.com with any questions regarding your specific project.
We recommend that stainless steel fasteners be used with neoprene or plastic washers.
Signs, Lighting and Handrails
Proper reinforcement must be installed behind the panels when attaching objects such as signs, lights, and railings. DO NOT attach anything directly on the panels.
As with any natural metal or process, you can expect slight color variance from panel to panel with an anodized finish.