Passengers flying at General Mitchell International Airport in Milwaukee are now greeted by a stunning new baggage claim area that opened in July. The high-traffic area needed a durable interior and exterior material that also improved the aesthetics to enhance passengers’ experiences. This was accomplished by a single-source supplier, Dri-Design, which manufactured Shadow Series wall panels, standard flat wall panels, and column covers for the renovation and expansion project.
“There are various infill, wall and column cover conditions where metal panels could achieve that level of durability, provide a long-lasting color and finish, and be easy to maintain,” said Debra Sider, principal with Engberg Anderson Architects, Milwaukee. “In addition, the panels were installed in both existing and new construction locations. From an aesthetic perspective, the metal panels provided continuity across the overall building.”
The 0.080-inch aluminum standard and Shadow Series wall panels were finished in Bone White and Bright Silver. They were installed by Architectural Products of Wausau, Wausau, Wis. Shadow Series panels can be manufactured with varying depths. This freedom to design each panel gives you an unlimited capacity to create a dynamic, one-of-a-kind surface on nearly any façade. The substrate or weather barrier do not need to be modified.
The white panels were used outside, and the silver panels were used for an interior feature wall, which runs the length of the building and through to the exterior. This feature wall adds a mosaic quality to the interior space, consistent with other design features in the project. Skylights that run the length of the building illuminate the panels, bringing a reflective and color-changing quality to the multi-dimensional wall. The smooth-finish white panels blend with the other white clad buildings adjacent to the baggage claim. “The dimensional feature wall is very dynamic, both elegant and playful at the same time,” Sider said. “The flat panels used on the column covers and other exterior walls are stunning. Metal panels were installed using a rainscreen system that meets our constructability standards. The details work well with the other exterior glass and precast materials.”
Dri-Design was selected because it could serve as a single-source provider for all the metal products. It also provided a variety of highly durable and long-lasting colors and finishes. The baggage claim building is designed to be LEED certified, and the Dri-Design products added points for recycled content, recyclable material, regional fabrication and no VOCs. Lastly, it was economical and cost competitive. John H. Schremp, P.E., president of Architectural Products of Wausau, added: “Dri Design was also selected for its unique rainscreen design using a solid aluminum sheet. The highly automated fabrication of the panels ensured that the panels would have extremely tight tolerances. At the interior, Dri Design was selected again for its high quality in fabrication and also for the ability to provide a shadow wall feature extending over the 600-foot-long wall.”
This three-phased project took place from September 2013 to July 2015. Working on an existing building required coordination and scheduling; the owner did not want to disrupt the more than 800,000 passengers who travel through the airport each month. Some wall panel details had to be determined on site to conform to existing conditions that were not apparent during the design stages. Dri Design worked with the architect and contractor to provide the most appropriate solutions.